Cooker hood installation · Shropshire
Cooker hood installation in Telford
Need cooker hood installation in Telford? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.
What prompts cooker hood installation in Telford?
If your Telford kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.
If condensation runs down the windows of your Telford kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run. We cover all of Telford, including the TF3 postcode district, and travel out to neighbouring towns across Shropshire.
What is in a typical job?
After the survey visit we write the scope down. For cooker hood installation in Telford it usually covers:
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
- Short, straight runs of rigid ducting wherever the route allows
- Hood fixed at the height set by the hood and hob manufacturers
- Recirculating hoods fitted with carbon filters, and their limits explained
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Core drilling through the outside wall and an external grille fitted and sealed
How much does cooker hood installation cost in Telford?
Use these ranges to plan your budget. They include VAT, reflect costs in the West Midlands, and are firmed up once we have seen your Telford kitchen. For the West Midlands, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£240 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £300–£900 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £300–£630 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£300 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Telford homes
Typical homes in this part of Shropshire include timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.
Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance. Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier.
Regulations for kitchen work in Telford
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.
Practical advice for Telford homeowners
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
- If your Telford home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
Questions about cooker hood installation in Telford
How much does cooker hood installation cost in Telford?
Cooker hood installation in Telford typically costs £120 to £240 including VAT for a like-for-like cooker hood swap, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you work near Telford as well?
Yes. As well as Telford itself, we cover the rest of Shropshire and nearby towns such as Wellington and Bridgnorth. The process is the same wherever the kitchen is.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Also covering nearby towns
Neighbouring towns where we offer cooker hood installation:
- Cooker hood installation in Wellington
- Cooker hood installation in Bridgnorth
- Cooker hood installation in Shrewsbury
- Cooker hood installation in Wolverhampton
- Cooker hood installation in Market Drayton
- Cooker hood installation in Wednesfield
- Cooker hood installation across Shropshire