Cooker hood installation · Wales
Cooker hood installation in Powys
Our cooker hood installation work covers the whole of Powys, including Newtown, Brecon and Welshpool.
Why do people in Powys choose cooker hood installation?
If your Powys house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.
If your Powys kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.
What does cooker hood installation in Powys include?
After the survey visit we write the scope down. For cooker hood installation in Powys it usually covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Powys?
The figures below are guide prices for Powys, including VAT and adjusted for typical costs across Wales. The fixed price comes after we have measured up. Labour rates in Wales are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£220 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£830 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£580 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Powys
Across Powys you will often find stone farmhouses, timber-framed cottages, Victorian terraces and post-war bungalows, and each shapes the kitchen differently. Farmhouses and stone cottages often have a large older kitchen or a small lean-to, while Victorian terraces in Brecon and Llandrindod Wells tend to have a narrow back galley.
Powys mains water is generally soft, though many rural homes rely on private supplies, which may need testing and filtering before a boiling water tap is fitted. Long distances, single-track roads and farm tracks can limit delivery vehicles, so worktop lengths, delivery times and waste removal need planning well ahead.
Rural farmhouses are often off the gas grid, so the kitchen may be planned around an oil or solid-fuel range or induction cooking. Many cottages have thick stone walls and low beams that shape where tall units and extraction can go.
Rules for cooker hood installation in Powys
Wales has its own Approved Document F with the same broad rates: about 30 litres per second from a hood extracting outside, or 60 litres per second from a fan elsewhere. A recirculating hood does not remove moisture. Extending a kitchen circuit to power a hood is notifiable under Part P in Wales, and a new vent through the outside wall of a flat may need planning permission and the freeholder's consent.
Homes inside Bannau Brycheiniog National Park, listed buildings and conservation areas may need consent for a new external vent or changes to historic features.
Before you start
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- Check whether your Powys home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
- Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
Questions about cooker hood installation in Powys
How much does cooker hood installation cost in Powys?
For a like-for-like cooker hood swap, budget around £110 to £220 including VAT in Powys. That reflects typical costs in Wales; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Powys?
Yes. We carry out cooker hood installation across Powys, including Newtown, Brecon, Welshpool and Llandrindod Wells. Every job starts with a free survey visit and an itemised written quote.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Cooker hood installation in towns across Powys
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Newtown
- Cooker hood installation in Brecon
- Cooker hood installation in Welshpool
- Cooker hood installation in Llandrindod Wells