Cooker hood installation in North Shields

Why cooker hood installation for a North Shields home?

Homeowners in North Shields adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

People in flats across Tyne and Wear sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation. North Shields sits about 7 miles north-east of Newcastle upon Tyne, and our Tyne and Wear coverage takes in everything in between.

What does cooker hood installation in North Shields include?

Your written quote lists everything included. For cooker hood installation, that normally means:

Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Short, straight runs of rigid ducting wherever the route allows
Power supply connected by an electrician and tested to BS 7671
Recirculating hoods fitted with carbon filters, and their limits explained
Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed

Guide prices for cooker hood installation in North Shields

These guide ranges include VAT at 20% and are adjusted for prices in the North East. We confirm your price in writing after a free survey visit. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for cooker hood installation in North Shields
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£220
New ducted hood through an outside wallCore drilling, ducting run and external grille	£270–£810
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£270–£570
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£270

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Tyne and Wear includes tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses, so no two kitchen fits are quite alike. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

Do you need approval for cooker hood installation in North Shields?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Tips before you start

Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
For an island hood in your North Shields kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
If you live in a flat in Tyne and Wear, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in North Shields

How much does cooker hood installation cost in North Shields?

Cooker hood installation in North Shields typically costs £110 to £220 including VAT for a like-for-like cooker hood swap, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in North Shields before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in North Shields. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Nearby places we cover

Close to North Shields? We cover these nearby towns too: