Cooker hood installation in Hebburn

Thinking about cooker hood installation in Hebburn?

If your Hebburn kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.

If condensation runs down the windows of your Hebburn kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run. Homes right across Hebburn are covered, as are nearby places such as Jarrow, Wallsend and the villages in between.

What is in a typical job?

Here is what usually goes into cooker hood installation, adjusted to your Hebburn kitchen after we have measured it:

Survey of the hob position, duct route, outside wall and any open-flued appliance
Short, straight runs of rigid ducting wherever the route allows
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Core drilling through the outside wall and an external grille fitted and sealed
Recirculating hoods fitted with carbon filters, and their limits explained
Power supply connected by an electrician and tested to BS 7671

Cooker hood installation prices in Hebburn

These guide ranges include VAT at 20% and are adjusted for prices in the North East. We confirm your price in writing after a free survey visit. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Cooker hood installation prices in Hebburn
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£220
New ducted hood through an outside wallCore drilling, ducting run and external grille	£270–£810
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£270–£570
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£270

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Hebburn

In and around Hebburn, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

What rules apply to cooker hood installation in Hebburn?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Worth knowing before the fit

Check whether your Hebburn home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
If you live in a flat in Tyne and Wear, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.

Questions about cooker hood installation in Hebburn

How much does cooker hood installation cost in Hebburn?

Guide prices in Hebburn are about £110 to £220 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Hebburn as well?

Yes. As well as Hebburn itself, we cover the rest of Tyne and Wear and nearby towns such as Jarrow and Wallsend. The process is the same wherever the kitchen is.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Cooker hood installation in neighbouring towns

Neighbouring towns where we offer cooker hood installation: