Kitchen plumbing in North Shields

Is kitchen plumbing right for your North Shields kitchen?

Homeowners across Tyne and Wear often want the washing machine out of the kitchen and into a utility space, which calls for new supplies and a separate waste.

Landlords in Tyne and Wear often ask for every appliance to have its own isolation valve, so a tenant can stop a leak quickly without turning off the whole property. Homes right across North Shields are covered, as are nearby places such as Tynemouth, South Shields and the villages in between.

What is in a typical job?

After the survey visit we write the scope down. For kitchen plumbing in North Shields it usually covers:

A cold feed for a boiling water tap tank or a fridge with a water dispenser
Waste pipes laid to a steady fall, with an access point for clearing blockages
Redundant pipes cut back to the live supply and capped, then a full leak check
Isolation valves on each tap and appliance feed for quick shut-off
Dishwasher and washing machine supplies, with waste connections through suitable traps
A survey of the stopcock, supply pipes, waste route and drain connection

Guide prices for kitchen plumbing in North Shields

The figures below are guide prices for North Shields, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for kitchen plumbing in North Shields
Typical project	Guide price
Sink, dishwasher and washing machine connectionsSupplies, valves and wastes in the new layout	£180–£450
Sink relocated, or new supplies for a boiling water tapNew pipe and waste runs	£360–£900
Waste run across a solid concrete floorChasing, pipework and reinstating the floor	£540–£1,400
Radiator moved or replacedDrain down, new pipework and refill	£220–£450

Guide ranges cover labour, pipework, fittings, valves and traps; the sink, tap and appliances themselves, any gas work and any building control or building warrant fees are not included. Prices include VAT at 20%.

Fitting kitchens in older and newer North Shields homes

In and around North Shields, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

Building regulations, electrics and gas in North Shields

In England, kitchen pipework and fittings must meet the Water Supply (Water Fittings) Regulations 1999, which cover suitable materials, backflow protection and preventing waste or contamination of the supply. Connecting a sink to an existing waste or stack is routine, but a new connection to an underground drain, or a change to how waste water is discharged, involves building control. Gas pipework to a hob or cooker is separate work for a Gas Safe registered engineer.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Tips before you start

Locate the stopcock in your North Shields home and check it turns before fitting day; a seized one may need replacing before the plumber can start.
Plan a day or two without a working sink in your North Shields kitchen, and fill a few large bottles before the water goes off.
Ask for supplies and wastes to be positioned to suit each appliance's instructions, so hoses are short and do not kink.
If a radiator sits where new units will go, decide early whether to move it, swap it for a tall one or fit a plinth heater.

Questions about kitchen plumbing in North Shields

How much does kitchen plumbing cost in North Shields?

Kitchen plumbing in North Shields typically costs £180 to £450 including VAT for connecting the sink, dishwasher and washing machine, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of North Shields?

Yes. We work across North Shields, including the NE29 and NE30 postcode districts, and nearby towns such as Tynemouth and South Shields. Book a free survey visit and we will arrange a time that suits you.

What plumbing does a boiling water tap need?

A boiling water tap needs a cold supply to a tank under the sink, usually through a filter, plus an electrical socket or spur for the tank. Some models also take hot and cold feeds for the mixer side. The tank uses cupboard space, so the sink unit is planned around it, and the tap's minimum water pressure is checked against your supply.

What happens to the old pipes during a kitchen refit?

Pipes that will no longer serve anything are cut back to the nearest live pipe and capped, rather than left as long dead ends behind the new units. Water sitting in an unused length of pipe can go stale, and a forgotten joint can leak where nobody will see it. Old wastes are removed or sealed so they cannot let drain smells back into the room.

When does kitchen plumbing need building control?

Most kitchen plumbing does not. Replacing a sink, adding appliance connections and rerouting supply pipes inside the kitchen are routine. A new connection to an underground drain, or a change in how waste water is discharged, needs building control approval in England, Wales and Northern Ireland, or a building warrant in Scotland. Every fitting must also meet the water fittings rules for your nation.

Also covering nearby towns

Close to North Shields? We cover these nearby towns too: