Kitchen Installers UK

Cooker hood installation · Tyne and Wear

Cooker hood installation in Whitley Bay

We take on cooker hood installation in Whitley Bay and the surrounding NE26 postcodes, working to a written scope so you know exactly what is included before anyone starts.

Guide price£110 to £810
Postcodes includeNE26
Timescale3 to 7 hours for most hoods
A fitter on a step ladder fixing a stainless steel chimney cooker hood above a hob, with ducting visible above

When does cooker hood installation make sense in Whitley Bay?

People in flats across Tyne and Wear sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.

If condensation runs down the windows of your Whitley Bay kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run. We cover all of Whitley Bay, including the NE26 postcode district, and travel out to neighbouring towns across Tyne and Wear.

What does cooker hood installation in Whitley Bay include?

After the survey visit we write the scope down. For cooker hood installation in Whitley Bay it usually covers:

  • Core drilling through the outside wall and an external grille fitted and sealed
  • Hood fixed at the height set by the hood and hob manufacturers
  • Island and ceiling hoods fixed into the ceiling structure by two people
  • Recirculating hoods fitted with carbon filters, and their limits explained
  • Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
  • Power supply connected by an electrician and tested to BS 7671

What should you budget for cooker hood installation in Whitley Bay?

Typical cooker hood installation prices for homes in Whitley Bay, including VAT and adjusted for the North East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

What should you budget for cooker hood installation in Whitley Bay?
Typical projectGuide price
Like-for-like cooker hood swapSame position and ducting£110–£220
New ducted hood through an outside wallCore drilling, ducting run and external grille£270–£810
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure£270–£570
Recirculating hood fittedNo ducting; carbon filters need replacing£110–£270

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Whitley Bay homes

In and around Whitley Bay, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

Regulations for kitchen work in Whitley Bay

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Getting the most from your cooker hood installation

  • Before choosing a hood for your Whitley Bay kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
  • For an island hood in your Whitley Bay kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
  • If your Whitley Bay home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
  • Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.

Questions about cooker hood installation in Whitley Bay

How much does cooker hood installation cost in Whitley Bay?

Cooker hood installation in Whitley Bay typically costs £110 to £220 including VAT for a like-for-like cooker hood swap, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Whitley Bay before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Whitley Bay. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Nearby places we cover

The same service is available a short drive from Whitley Bay, including:

More services for Whitley Bay kitchens

Free survey visit

Book a free survey visit in Whitley Bay

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price