Kitchen Installers UK

Cooker hood installation · Tyne and Wear

Cooker hood installation in South Shields

Whether your South Shields kitchen is a narrow galley or an open-plan room, cooker hood installation follows the same careful order: survey, written scope, fit and a final check together.

Guide price£110 to £810
Postcodes includeNE33
Timescale3 to 7 hours for most hoods
A fitter on a step ladder fixing a stainless steel chimney cooker hood above a hob, with ducting visible above

Is cooker hood installation right for your South Shields kitchen?

If condensation runs down the windows of your South Shields kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.

A new kitchen in a South Shields home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together. South Shields sits about 7 miles east of Newcastle upon Tyne, and our Tyne and Wear coverage takes in everything in between.

What does cooker hood installation in South Shields include?

The exact scope is agreed after the survey, but a typical job in South Shields covers:

  • Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
  • Island and ceiling hoods fixed into the ceiling structure by two people
  • Power supply connected by an electrician and tested to BS 7671
  • Short, straight runs of rigid ducting wherever the route allows
  • Hood fixed at the height set by the hood and hob manufacturers
  • Survey of the hob position, duct route, outside wall and any open-flued appliance

How much does cooker hood installation cost in South Shields?

The figures below are guide prices for South Shields, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

How much does cooker hood installation cost in South Shields?
Typical projectGuide price
Like-for-like cooker hood swapSame position and ducting£110–£220
New ducted hood through an outside wallCore drilling, ducting run and external grille£270–£810
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure£270–£570
Recirculating hood fittedNo ducting; carbon filters need replacing£110–£270

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

You will find tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses throughout Tyne and Wear. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

What rules apply to cooker hood installation in South Shields?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Practical advice for South Shields homeowners

  • Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
  • Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
  • Before choosing a hood for your South Shields kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
  • Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.

Questions about cooker hood installation in South Shields

How much does cooker hood installation cost in South Shields?

Guide prices in South Shields are about £110 to £220 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near South Shields as well?

Yes. As well as South Shields itself, we cover the rest of Tyne and Wear and nearby towns such as Tynemouth and North Shields. The process is the same wherever the kitchen is.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation near South Shields

We also carry out cooker hood installation in these towns near South Shields:

Combine cooker hood installation with other work

Free survey visit

Book a free survey visit in South Shields

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price