Cooker hood installation in New Milton

Thinking about cooker hood installation in New Milton?

Some New Milton households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.

Cooks across Hampshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. We work throughout New Milton (BH25) and across the wider Hampshire area.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Power supply connected by an electrician and tested to BS 7671
Short, straight runs of rigid ducting wherever the route allows
Survey of the hob position, duct route, outside wall and any open-flued appliance
Recirculating hoods fitted with carbon filters, and their limits explained
Core drilling through the outside wall and an external grille fitted and sealed
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

What does cooker hood installation cost in New Milton?

The figures below are guide prices for New Milton, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What does cooker hood installation cost in New Milton?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

House types around New Milton and what they mean for a kitchen

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in New Milton

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Worth knowing before the fit

Before choosing a hood for your New Milton kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
For an island hood in your New Milton kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in New Milton

How much does cooker hood installation cost in New Milton?

Cooker hood installation in New Milton typically costs £140 to £280 including VAT for a like-for-like cooker hood swap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near New Milton as well?

Yes. As well as New Milton itself, we cover the rest of Hampshire and nearby towns such as Christchurch and Lymington. The process is the same wherever the kitchen is.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Also covering nearby towns

Neighbouring towns where we offer cooker hood installation: