Cooker hood installation in Ringwood

Why do people in Ringwood choose cooker hood installation?

If condensation runs down the windows of your Ringwood kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.

Some Ringwood households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob. If your home is in Ringwood or close by in Christchurch or New Milton, the same survey, quote and fitting process applies.

What does cooker hood installation in Ringwood include?

Here is what usually goes into cooker hood installation, adjusted to your Ringwood kitchen after we have measured it:

Short, straight runs of rigid ducting wherever the route allows
Hood fixed at the height set by the hood and hob manufacturers
Power supply connected by an electrician and tested to BS 7671
Core drilling through the outside wall and an external grille fitted and sealed
Survey of the hob position, duct route, outside wall and any open-flued appliance
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

Guide prices for cooker hood installation in Ringwood

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Ringwood kitchen. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for cooker hood installation in Ringwood
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Ringwood

Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Regulations for kitchen work in Ringwood

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book cooker hood installation in Ringwood

Check whether your Ringwood home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Before choosing a hood for your Ringwood kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Ringwood

How much does cooker hood installation cost in Ringwood?

Cooker hood installation in Ringwood typically costs £140 to £280 including VAT for a like-for-like cooker hood swap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Ringwood as well?

Yes. As well as Ringwood itself, we cover the rest of Hampshire and nearby towns such as Christchurch and New Milton. The process is the same wherever the kitchen is.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Cooker hood installation near Ringwood

The same service is available a short drive from Ringwood, including: