Cooker hood installation in Lymington

Thinking about cooker hood installation in Lymington?

If your Lymington kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.

Cooks across Hampshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. We work throughout Lymington (SO41) and across the wider Hampshire area.

What does cooker hood installation in Lymington include?

Your written quote lists everything included. For cooker hood installation, that normally means:

Short, straight runs of rigid ducting wherever the route allows
Survey of the hob position, duct route, outside wall and any open-flued appliance
Power supply connected by an electrician and tested to BS 7671
Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed
Island and ceiling hoods fixed into the ceiling structure by two people

What should you budget for cooker hood installation in Lymington?

Typical cooker hood installation prices for homes in Lymington, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What should you budget for cooker hood installation in Lymington?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Lymington?

Across Hampshire you will often find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, and each shapes the kitchen differently. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Regulations for kitchen work in Lymington

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Before you book cooker hood installation in Lymington

If your Lymington home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Before choosing a hood for your Lymington kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
For an island hood in your Lymington kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.

Questions about cooker hood installation in Lymington

How much does cooker hood installation cost in Lymington?

For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in Lymington. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Lymington?

Yes. We work across Lymington, including the SO41 postcode district, and nearby towns such as New Milton and Hythe, Hampshire. Book a free survey visit and we will arrange a time that suits you.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Cooker hood installation near Lymington

Close to Lymington? We cover these nearby towns too: