Utility room fitting in New Milton

Thinking about utility room fitting in New Milton?

Landlords letting larger family homes across Hampshire sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances.

In a New Milton house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall. We cover all of New Milton, including the BH25 postcode district, and travel out to neighbouring towns across Hampshire.

What does utility room fitting in New Milton include?

Here is what usually goes into utility room fitting, adjusted to your New Milton kitchen after we have measured it:

Stacking kit fitted where the washer and dryer sit one above the other
Extract fan fitted to clear moisture from washing and drying
Free survey visit to check water, waste, power and outside wall positions
Utility sink and tap plumbed in, with new supplies and waste where none exist
Worktop over the washing machine and dryer, supported clear of the appliances
Base, wall and tall units fitted, levelled and fixed to the wall

What does utility room fitting cost in New Milton?

Typical utility room fitting prices for homes in New Milton, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What does utility room fitting cost in New Milton?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around New Milton

Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Regulations for kitchen work in New Milton

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Tips before you start

Plan the sockets in your New Milton utility so each appliance can be switched off at an accessible switch without moving the machine.
If the utility will be in the garage of your New Milton home, make sure the space stays above freezing in winter for the pipes and machines.
Before choosing a dryer for your New Milton utility, check whether there is an outside wall close enough for a short, straight vent duct.
Under-stairs spaces can take a washer and dryer, but check the headroom, the ventilation and room to pull machines out before committing.

Questions about utility room fitting in New Milton

How much does utility room fitting cost in New Milton?

For fitting three to six utility units and a worktop you have bought, budget around £1,400 to £3,400 including VAT in New Milton. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near New Milton as well?

Yes. As well as New Milton itself, we cover the rest of Hampshire and nearby towns such as Christchurch and Lymington. The process is the same wherever the kitchen is.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Nearby places we cover

Close to New Milton? We cover these nearby towns too: