Cooker hood installation · England
Cooker hood installation in East Sussex
If you need cooker hood installation anywhere in East Sussex, we survey the kitchen, agree the scope with you and book every trade through to handover.
Who usually needs cooker hood installation in East Sussex?
If condensation runs down the windows of your East Sussex kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.
Cooks across East Sussex who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.
What does cooker hood installation in East Sussex include?
After the survey visit we write the scope down. For cooker hood installation in East Sussex it usually covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in East Sussex?
Typical cooker hood installation prices for homes in East Sussex, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £140–£280 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £340–£1,000 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £340–£720 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £140–£340 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across East Sussex
Across East Sussex you will often find Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows, and each shapes the kitchen differently. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.
East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering. Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning.
Flats in converted Regency and Victorian houses often have narrow kitchens that need careful planning to fit a fridge, washing machine and enough worktop. In a 1930s semi or bungalow, opening the kitchen into the dining room is a common change.
Rules for cooker hood installation in East Sussex
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.
Before you start
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
- For an island hood in your East Sussex kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Questions about cooker hood installation in East Sussex
How much does cooker hood installation cost in East Sussex?
For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in East Sussex. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of East Sussex?
Yes. We carry out cooker hood installation across East Sussex, including Brighton, Eastbourne, Hastings and Hove. Every job starts with a free survey visit and an itemised written quote.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Cooker hood installation in towns across East Sussex
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Brighton
- Cooker hood installation in Eastbourne
- Cooker hood installation in Hastings
- Cooker hood installation in Hove
- Cooker hood installation in Bexhill-on-Sea
- Cooker hood installation in Hailsham
- Cooker hood installation in Seaford
- Cooker hood installation in Rottingdean
- Cooker hood installation in Crowborough
- Cooker hood installation in Portslade
- Cooker hood installation in Peacehaven
- Cooker hood installation in Uckfield
- Cooker hood installation in Lewes
- Cooker hood installation in Rye
- Cooker hood installation in Battle
