Cooker hood installation in Seaford

Why do people in Seaford choose cooker hood installation?

People in flats across East Sussex sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.

If your Seaford house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. We work throughout Seaford (BN25) and across the wider East Sussex area.

What does the job involve?

Here is what usually goes into cooker hood installation, adjusted to your Seaford kitchen after we have measured it:

Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Survey of the hob position, duct route, outside wall and any open-flued appliance
Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows
Island and ceiling hoods fixed into the ceiling structure by two people
Recirculating hoods fitted with carbon filters, and their limits explained

Cooker hood installation prices in Seaford

Typical cooker hood installation prices for homes in Seaford, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Cooker hood installation prices in Seaford
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille	£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing	£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Seaford

You will find Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows throughout East Sussex. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering. Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning.

Regulations for kitchen work in Seaford

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Practical advice for Seaford homeowners

Check whether your Seaford home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
If your Seaford home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.

Questions about cooker hood installation in Seaford

How much does cooker hood installation cost in Seaford?

Guide prices in Seaford are about £140 to £280 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Seaford as well?

Yes. As well as Seaford itself, we cover the rest of East Sussex and nearby towns such as Peacehaven and Rottingdean. The process is the same wherever the kitchen is.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Cooker hood installation in neighbouring towns

The same service is available a short drive from Seaford, including: