Kitchen Installers UK
0800 088 6341 Get a guide price

Cooker hood installation · England

Cooker hood installation in Surrey

Our cooker hood installation work covers the whole of Surrey, including Woking, Guildford and Esher.

Guide price£140 to £1,000
Towns covered25 towns, including Woking
Timescale3 to 7 hours for most hoods
Get a guide price Book a free survey visit
A fitter on a step ladder fixing a stainless steel chimney cooker hood above a hob, with ducting visible above

Why cooker hood installation for a Surrey home?

Some Surrey households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.

A new kitchen in a Surrey home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.

What does cooker hood installation in Surrey include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Survey of the hob position, duct route, outside wall and any open-flued appliance
  • Hood fixed at the height set by the hood and hob manufacturers
  • Core drilling through the outside wall and an external grille fitted and sealed
  • Short, straight runs of rigid ducting wherever the route allows
  • Island and ceiling hoods fixed into the ceiling structure by two people
  • Recirculating hoods fitted with carbon filters, and their limits explained
  • Power supply connected by an electrician and tested to BS 7671
  • Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

How much does cooker hood installation cost in Surrey?

As a starting point for Surrey, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

How much does cooker hood installation cost in Surrey?
Typical projectGuide price
Like-for-like cooker hood swapSame position and ducting£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes across Surrey

The housing mix across Surrey includes 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, so no two kitchen fits are quite alike. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

Joining the kitchen and dining room in a 1930s semi, often with a peninsula and seating, is a common project. Larger detached houses tend to suit a supply-and-fit kitchen with an island, a boiling water tap, a separate utility and lighting planned in zones.

Rules for cooker hood installation in Surrey

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Before you start

  • In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
  • Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
  • For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
  • Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
  • If your Surrey home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
  • Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.

Questions about cooker hood installation in Surrey

How much does cooker hood installation cost in Surrey?

Guide prices in Surrey are about £140 to £280 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover the whole of Surrey?

Yes. We carry out cooker hood installation across Surrey, including Woking, Guildford, Esher and Redhill. Every job starts with a free survey visit and an itemised written quote.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Cooker hood installation in towns across Surrey

Choose a town for local guide prices and postcode coverage:

Cooker hood installation in nearby areas

Free survey visit

Book a free survey visit in Surrey

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price