Kitchen Installers UK

Cooker hood installation · East Sussex

Cooker hood installation in Battle

If you live in Battle and need cooker hood installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Guide price£140 to £1,000
Postcodes includeTN33
Timescale3 to 7 hours for most hoods
A fitter on a step ladder fixing a stainless steel chimney cooker hood above a hob, with ducting visible above

What prompts cooker hood installation in Battle?

If your Battle kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.

Some Battle households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob. We cover all of Battle, including the TN33 postcode district, and travel out to neighbouring towns across East Sussex.

What does cooker hood installation in Battle include?

Your written quote lists everything included. For cooker hood installation, that normally means:

  • Core drilling through the outside wall and an external grille fitted and sealed
  • Recirculating hoods fitted with carbon filters, and their limits explained
  • Short, straight runs of rigid ducting wherever the route allows
  • Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
  • Power supply connected by an electrician and tested to BS 7671
  • Hood fixed at the height set by the hood and hob manufacturers

How much does cooker hood installation cost in Battle?

The figures below are guide prices for Battle, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

How much does cooker hood installation cost in Battle?
Typical projectGuide price
Like-for-like cooker hood swapSame position and ducting£140–£280
New ducted hood through an outside wallCore drilling, ducting run and external grille£340–£1,000
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure£340–£720
Recirculating hood fittedNo ducting; carbon filters need replacing£140–£340

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Battle?

The housing mix across East Sussex includes Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows, so no two kitchen fits are quite alike. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering. Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning.

Building regulations, electrics and gas in Battle

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Before you book cooker hood installation in Battle

  • Before choosing a hood for your Battle kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
  • For an island hood in your Battle kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
  • Check whether your Battle home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
  • Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.

Questions about cooker hood installation in Battle

How much does cooker hood installation cost in Battle?

For a like-for-like cooker hood swap, budget around £140 to £280 including VAT in Battle. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near Battle as well?

Yes. As well as Battle itself, we cover the rest of East Sussex and nearby towns such as Bexhill-on-Sea and Hastings. The process is the same wherever the kitchen is.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation in neighbouring towns

Close to Battle? We cover these nearby towns too:

More services for Battle kitchens

Free survey visit

Book a free survey visit in Battle

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price