Cooker hood installation · Scotland
Cooker hood installation in Dundee and Angus
If you need cooker hood installation anywhere in Dundee and Angus, we survey the kitchen, agree the scope with you and book every trade through to handover.
Why do people in Dundee and Angus choose cooker hood installation?
Some Dundee and Angus households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.
If your Dundee and Angus house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.
What does cooker hood installation in Dundee and Angus include?
Here is what usually goes into cooker hood installation, adjusted to your Dundee and Angus kitchen after we have measured it:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Dundee and Angus?
Use these ranges to plan your budget. They include VAT, reflect costs in Scotland, and are firmed up once we have seen your Dundee and Angus kitchen. Costs across Scotland tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£850 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£590 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Dundee and Angus
You will find sandstone tenement flats, Victorian villas, post-war council-built houses and fishing town cottages throughout Dundee and Angus. Dundee's tenement flats often have a narrow kitchen or a box room off the hall, while villas in Broughty Ferry and the Angus towns tend to have larger separate kitchens.
Dundee and Angus have soft mains water, so limescale is rarely an issue and taps and boiling water taps tend to stay free of heavy scale. Common stairs in tenements, steep streets in parts of Dundee and narrow glen roads in Angus can each affect deliveries and worktop lengths.
Tenement flats often have a small kitchen that owners open into the living room, which needs a building warrant if a load-bearing wall is involved, and can need one even if it is not, where the change affects the escape route or fire separation. Victorian villa kitchens may sit in an old scullery area with high ceilings and original features.
Rules for cooker hood installation in Dundee and Angus
In Scotland, standard 3.14 of the domestic Technical Handbook expects kitchens to have extract ventilation, and a recirculating hood alone does not remove moisture. Fitting an extractor fan or a ducted hood does not normally need a building warrant. In a flat, a new vent through a shared outside wall may need the other owners' agreement and planning permission, and a listed building may need listed building consent. Where the room has an open-flued gas appliance, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
Consent may be needed for new vents on listed buildings and in conservation areas, and homes in the upper Angus glens fall within the Cairngorms National Park.
Before you start
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- Before choosing a hood for your Dundee and Angus kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Questions about cooker hood installation in Dundee and Angus
How much does cooker hood installation cost in Dundee and Angus?
Guide prices in Dundee and Angus are about £110 to £230 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Dundee and Angus?
Yes. We carry out cooker hood installation across Dundee and Angus, including Dundee, Arbroath, Forfar and Montrose. Every job starts with a free survey visit and an itemised written quote.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Cooker hood installation in towns across Dundee and Angus
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Dundee
- Cooker hood installation in Arbroath
- Cooker hood installation in Forfar
- Cooker hood installation in Montrose
- Cooker hood installation in Brechin