Cooker hood installation in Montrose

When does cooker hood installation make sense in Montrose?

Homeowners in Montrose adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

People in flats across Dundee and Angus sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation. Montrose sits about 26 miles north-east of Dundee, and our Dundee and Angus coverage takes in everything in between.

What is included in the work?

Your written quote lists everything included. For cooker hood installation, that normally means:

Power supply connected by an electrician and tested to BS 7671
Core drilling through the outside wall and an external grille fitted and sealed
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Survey of the hob position, duct route, outside wall and any open-flued appliance
Island and ceiling hoods fixed into the ceiling structure by two people
Hood fixed at the height set by the hood and hob manufacturers

Guide prices for cooker hood installation in Montrose

The figures below are guide prices for Montrose, including VAT and adjusted for typical costs across Scotland. The fixed price comes after we have measured up. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for cooker hood installation in Montrose
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£850
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£590
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Montrose?

Across Dundee and Angus you will often find sandstone tenement flats, Victorian villas, post-war council-built houses and fishing town cottages, and each shapes the kitchen differently. Dundee's tenement flats often have a narrow kitchen or a box room off the hall, while villas in Broughty Ferry and the Angus towns tend to have larger separate kitchens.

Common stairs in tenements, steep streets in parts of Dundee and narrow glen roads in Angus can each affect deliveries and worktop lengths. Dundee and Angus have soft mains water, so limescale is rarely an issue and taps and boiling water taps tend to stay free of heavy scale.

Regulations for kitchen work in Montrose

In Scotland, standard 3.14 of the domestic Technical Handbook expects kitchens to have extract ventilation, and a recirculating hood alone does not remove moisture. Fitting an extractor fan or a ducted hood does not normally need a building warrant. In a flat, a new vent through a shared outside wall may need the other owners' agreement and planning permission, and a listed building may need listed building consent. Where the room has an open-flued gas appliance, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.

Consent may be needed for new vents on listed buildings and in conservation areas, and homes in the upper Angus glens fall within the Cairngorms National Park.

Before you book cooker hood installation in Montrose

Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
Check whether your Montrose home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Montrose

How much does cooker hood installation cost in Montrose?

Cooker hood installation in Montrose typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in Scotland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Montrose?

Yes. We work across Montrose, including the DD10 postcode district, and nearby towns such as Brechin and Arbroath. Book a free survey visit and we will arrange a time that suits you.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Also covering nearby towns

The same service is available a short drive from Montrose, including: