Utility room fitting in Reigate

Why do people in Reigate choose utility room fitting?

When a new kitchen is being planned in Surrey, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.

If your Reigate home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility. We cover all of Reigate, including the RH2 postcode district, and travel out to neighbouring towns across Surrey.

What is included in the work?

Here is what usually goes into utility room fitting, adjusted to your Reigate kitchen after we have measured it:

A vent to outside for a vented dryer, or a drain hose for condenser models
Utility sink and tap plumbed in, with new supplies and waste where none exist
Worktop over the washing machine and dryer, supported clear of the appliances
Base, wall and tall units fitted, levelled and fixed to the wall
Free survey visit to check water, waste, power and outside wall positions
Extract fan fitted to clear moisture from washing and drying

Guide prices for utility room fitting in Reigate

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Reigate kitchen. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for utility room fitting in Reigate
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Reigate

In and around Reigate, homes range across 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

What rules apply to utility room fitting in Reigate?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Tips before you start

Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
If your Surrey home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Reigate

How much does utility room fitting cost in Reigate?

Guide prices in Reigate are about £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Reigate do you work in?

All of them. Our Surrey coverage takes in the whole of Reigate, including the RH2 postcode district, as well as surrounding towns such as Redhill. If you are unsure, send us your postcode.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Utility room fitting near Reigate

Neighbouring towns where we offer utility room fitting: