Kitchen worktop fitting in Horsham

Is kitchen worktop fitting right for your Horsham kitchen?

When a Horsham kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units.

Homeowners in Horsham with sound units but worn, chipped or swollen laminate often replace just the worktops, keeping the rest of the kitchen as it is. If your home is in Horsham or close by in Crawley or Horley, the same survey, quote and fitting process applies.

What we cover for kitchen worktop fitting in Horsham

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Old worktops removed and taken away, with the sink and hob disconnected safely
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Matching upstands fitted and the joint to the wall sealed
Quartz, granite or sintered stone templated once the base units are fixed and level

Kitchen worktop fitting prices in Horsham

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Horsham kitchen. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Kitchen worktop fitting prices in Horsham
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Horsham homes

In and around Horsham, homes range across 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

What rules apply to kitchen worktop fitting in Horsham?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Before you book kitchen worktop fitting in Horsham

Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.

Questions about kitchen worktop fitting in Horsham

How much does kitchen worktop fitting cost in Horsham?

Guide prices in Horsham are about £580 to £1,400 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Horsham as well?

Yes. As well as Horsham itself, we cover the rest of West Sussex and nearby towns such as Crawley and Horley. The process is the same wherever the kitchen is.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Nearby places we cover

Neighbouring towns where we offer kitchen worktop fitting: