Kitchen Installers UK

Utility room fitting · Surrey

Utility room fitting in Godalming

Whether your Godalming kitchen is a narrow galley or an open-plan room, utility room fitting follows the same careful order: survey, written scope, fit and a final check together.

Guide price£460 to £8,000
Postcodes includeGU7
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Thinking about utility room fitting in Godalming?

Dog owners and keen walkers around Godalming often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.

In a Godalming house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall. If your home is in Godalming or close by in Guildford or Aldershot, the same survey, quote and fitting process applies.

What does the job involve?

After the survey visit we write the scope down. For utility room fitting in Godalming it usually covers:

  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Washing machine supply, waste and isolation valve, tested for leaks
  • Utility sink and tap plumbed in, with new supplies and waste where none exist
  • Base, wall and tall units fitted, levelled and fixed to the wall
  • Free survey visit to check water, waste, power and outside wall positions
  • Stacking kit fitted where the washer and dryer sit one above the other

What should you budget for utility room fitting in Godalming?

The figures below are guide prices for Godalming, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

What should you budget for utility room fitting in Godalming?
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Godalming?

Across Surrey you will often find 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates, and each shapes the kitchen differently. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day. Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering.

What rules apply to utility room fitting in Godalming?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Planning ahead

  • Plan the sockets in your Godalming utility so each appliance can be switched off at an accessible switch without moving the machine.
  • Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
  • Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
  • Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Godalming

How much does utility room fitting cost in Godalming?

Utility room fitting in Godalming typically costs £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Godalming before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Godalming. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Nearby places we cover

We also carry out utility room fitting in these towns near Godalming:

Planning more than one job in Godalming?

Free survey visit

Book a free survey visit in Godalming

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price