Kitchen Installers UK

Utility room fitting · Surrey

Utility room fitting in Aldershot

Our utility room fitting service covers Aldershot and nearby places such as Farnham and Farnborough, with a free survey visit and an itemised written quote as the first step.

Guide price£460 to £8,000
Postcodes includeGU12
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

What prompts utility room fitting in Aldershot?

Dog owners and keen walkers around Aldershot often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.

Larger households in Aldershot sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. We cover all of Aldershot, including the GU12 postcode district, and travel out to neighbouring towns across Surrey.

What is in a typical job?

After the survey visit we write the scope down. For utility room fitting in Aldershot it usually covers:

  • Free survey visit to check water, waste, power and outside wall positions
  • Worktop over the washing machine and dryer, supported clear of the appliances
  • Stacking kit fitted where the washer and dryer sit one above the other
  • Washing machine supply, waste and isolation valve, tested for leaks
  • Base, wall and tall units fitted, levelled and fixed to the wall
  • A vent to outside for a vented dryer, or a drain hose for condenser models

Guide prices for utility room fitting in Aldershot

The figures below are guide prices for Aldershot, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for utility room fitting in Aldershot
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Aldershot?

You will find 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates throughout Surrey. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day. Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering.

What rules apply to utility room fitting in Aldershot?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Practical advice for Aldershot homeowners

  • Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
  • Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
  • If your Surrey home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
  • If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Aldershot

How much does utility room fitting cost in Aldershot?

Guide prices in Aldershot are about £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Aldershot do you work in?

All of them. Our Surrey coverage takes in the whole of Aldershot, including the GU12 postcode district, as well as surrounding towns such as Farnham. If you are unsure, send us your postcode.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Utility room fitting near Aldershot

We also carry out utility room fitting in these towns near Aldershot:

Combine utility room fitting with other work

Free survey visit

Book a free survey visit in Aldershot

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price