Utility room fitting in Woking

When does utility room fitting make sense in Woking?

In a Woking house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall.

Larger households in Woking sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. We work throughout Woking (GU22) and across the wider Surrey area.

What does utility room fitting in Woking include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

A vent to outside for a vented dryer, or a drain hose for condenser models
Base, wall and tall units fitted, levelled and fixed to the wall
Extract fan fitted to clear moisture from washing and drying
Worktop over the washing machine and dryer, supported clear of the appliances
Free survey visit to check water, waste, power and outside wall positions
Stacking kit fitted where the washer and dryer sit one above the other

Utility room fitting prices in Woking

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Utility room fitting prices in Woking
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Local homes and their kitchens

In and around Woking, homes range across 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.

Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering. Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day.

Regulations for kitchen work in Woking

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.

Worth knowing before the fit

Before choosing a dryer for your Woking utility, check whether there is an outside wall close enough for a short, straight vent duct.
If your Surrey home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
If the utility will be in the garage of your Woking home, make sure the space stays above freezing in winter for the pipes and machines.
If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Woking

How much does utility room fitting cost in Woking?

For fitting three to six utility units and a worktop you have bought, budget around £1,400 to £3,400 including VAT in Woking. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you cover all of Woking?

Yes. We work across Woking, including the GU22 postcode district, and nearby towns such as Chertsey and Weybridge. Book a free survey visit and we will arrange a time that suits you.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Utility room fitting in neighbouring towns

Neighbouring towns where we offer utility room fitting: