Utility room fitting in Taunton

Is utility room fitting right for your Taunton kitchen?

Larger households in Taunton sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.

When a new kitchen is being planned in Somerset, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself. Our Somerset coverage reaches every part of Taunton (TA1) and out towards Bridgwater.

What is in a typical job?

Here is what usually goes into utility room fitting, adjusted to your Taunton kitchen after we have measured it:

Stacking kit fitted where the washer and dryer sit one above the other
Utility sink and tap plumbed in, with new supplies and waste where none exist
Free survey visit to check water, waste, power and outside wall positions
Worktop over the washing machine and dryer, supported clear of the appliances
Base, wall and tall units fitted, levelled and fixed to the wall
Extract fan fitted to clear moisture from washing and drying

What should you budget for utility room fitting in Taunton?

Typical utility room fitting prices for homes in Taunton, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices across the South West are broadly in line with UK averages.

What should you budget for utility room fitting in Taunton?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,200–£3,100
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,100–£7,200
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£410–£1,000

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Taunton?

The housing mix across Somerset includes Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses, so no two kitchen fits are quite alike. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.

Building regulations, electrics and gas in Taunton

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Practical advice for Taunton homeowners

Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
If your Somerset home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Before choosing a dryer for your Taunton utility, check whether there is an outside wall close enough for a short, straight vent duct.
Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Taunton

How much does utility room fitting cost in Taunton?

Guide prices in Taunton are about £1,200 to £3,100 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Taunton before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Taunton. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Nearby places we cover

Neighbouring towns where we offer utility room fitting: