Kitchen flooring in Chard

Thinking about kitchen flooring in Chard?

If your home in Somerset has suspended timber floorboards, a plywood overlay usually goes down first so tiles or LVT do not crack or show the board joints.

Families across Somerset often choose LVT for a kitchen because it is warmer and quieter underfoot than tiles and copes well with spills and dropped cups. We cover all of Chard, including the TA20 postcode district, and travel out to neighbouring towns across Somerset.

What does the job involve?

Your written quote lists everything included. For kitchen flooring, that normally means:

Old coverings lifted and removed, with pre-2000 floor tiles checked for asbestos first
Free survey visit to check the subfloor, measure up and give an itemised quote
Threshold trims at doorways, with skirting, plinths and kickboards refitted
Flooring run under appliance spaces so machines can be pulled out for servicing
Moisture checks on concrete floors and screeds before any floor finish is laid
LVT, sheet vinyl, porcelain or ceramic tiles, or engineered wood laid to suit the room

Kitchen flooring prices in Chard

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Chard kitchen. Costs in the South West sit close to the national guide.

Kitchen flooring prices in Chard
Typical project	Guide price
LVT or vinyl, kitchen floorPreparation, underlay where needed and trims	£520–£1,500
Porcelain or ceramic tiles, kitchen floorPreparation, adhesive, grout and trims	£930–£2,100
Floor levelling or new plywood baseSo the floor finish and units sit flat	£310–£930

Guide prices are for a typical-sized kitchen floor, including preparation, adhesive or underlay and trims; the material you choose, open-plan floor areas and any levelling or plywood base are confirmed at the survey. Prices include VAT at 20%.

House types around Chard and what they mean for a kitchen

The housing mix across Somerset includes Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses, so no two kitchen fits are quite alike. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Building regulations, electrics and gas in Chard

A new kitchen floor in England needs no planning permission or building regulations approval. In a flat, check the lease first: leases often require a sound-reducing underlay, or forbid hard floors without the freeholder's consent. If electric underfloor heating goes under the new floor on a new circuit, that circuit is notifiable under Part P. In a listed building, removing historic floors may need listed building consent.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Before you book kitchen flooring in Chard

Ask for the floor to continue under the dishwasher and fridge spaces, so appliances can be slid out for repair without lifting the edge of the floor.
Let LVT or engineered wood acclimatise in the room for as long as the maker recommends before it is laid, with the heating at its normal setting.
Keep pets and children off a newly tiled floor until the grout has set, and put felt pads on chair legs if your Chard kitchen has LVT or wood.
Decide early whether the floor runs under the units or stops at the plinths; it affects ordering quantities, plinth heights and how the kitchen is fitted.

Questions about kitchen flooring in Chard

How much does kitchen flooring cost in Chard?

Kitchen flooring in Chard typically costs £520 to £1,500 including VAT for an LVT or vinyl kitchen floor, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Chard as well?

Yes. As well as Chard itself, we cover the rest of Somerset and nearby towns such as Honiton and Taunton. The process is the same wherever the kitchen is.

Is engineered wood a good choice for a kitchen floor?

It can be, but it needs more care than LVT or tiles. Engineered wood can swell or stain if water sits on it, so it is less suited to the areas around a sink or dishwasher, where leaks are most likely. If you choose it, pick a board the maker approves for kitchens, wipe spills promptly and keep the finish maintained.

Should kitchen flooring go down before or after the units?

It depends on the floor. Tiles are often laid first, or at least run under the appliance spaces, so a dishwasher or fridge can be pulled out without catching on the edge. Floating floors such as click LVT or engineered boards usually go down after the units, up to the plinth line, so they are not trapped under heavy fixed cabinets. We follow the flooring maker's instructions.

Does my kitchen floor need levelling before new flooring?

Often, yes. Thin floors such as LVT and sheet vinyl show every dip and ridge underneath, and tiles can crack if the base flexes or is uneven. Concrete floors are usually smoothed with a levelling compound, while timber floorboards are normally overlaid with plywood screwed down at close centres. We check the floor at the survey and price any preparation as its own line.

Also covering nearby towns

Close to Chard? We cover these nearby towns too: