Utility room fitting · Greater London
Utility room fitting in Catford
Looking for utility room fitting in Catford? We survey, quote and carry out utility room fitting for homes across Catford and the rest of Greater London, with one contract from the first measure to the final check.
Thinking about utility room fitting in Catford?
When a new kitchen is being planned in Greater London, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.
In a Catford house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall. We work throughout Catford (SE6) and across the wider Greater London area.
What we cover for utility room fitting in Catford
After the survey visit we write the scope down. For utility room fitting in Catford it usually covers:
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Worktop over the washing machine and dryer, supported clear of the appliances
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Washing machine supply, waste and isolation valve, tested for leaks
- Stacking kit fitted where the washer and dryer sit one above the other
- Extract fan fitted to clear moisture from washing and drying
How much does utility room fitting cost in Catford?
Typical utility room fitting prices for homes in Catford, including VAT and adjusted for London. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in London generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,600–£3,900 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,900–£9,100 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £520–£1,300 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
House types around Catford and what they mean for a kitchen
Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.
Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.
Regulations for kitchen work in Catford
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.
Planning ahead
- Plan the sockets in your Catford utility so each appliance can be switched off at an accessible switch without moving the machine.
- Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
- In a Catford flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
- A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.
Questions about utility room fitting in Catford
How much does utility room fitting cost in Catford?
Utility room fitting in Catford typically costs £1,600 to £3,900 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Can you measure up in Catford before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Catford. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Utility room fitting near Catford
Neighbouring towns where we offer utility room fitting:
- Utility room fitting in Brockley
- Utility room fitting in Blackheath
- Utility room fitting in New Cross
- Utility room fitting in Greenwich
- Utility room fitting in Beckenham
- Utility room fitting in Peckham
- Utility room fitting across Greater London