Utility room fitting in New Cross

What prompts utility room fitting in New Cross?

Larger households in New Cross sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.

In a New Cross house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall. Homes right across New Cross are covered, as are nearby places such as Brockley, Greenwich and the villages in between.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in New Cross covers:

A vent to outside for a vented dryer, or a drain hose for condenser models
Utility sink and tap plumbed in, with new supplies and waste where none exist
Base, wall and tall units fitted, levelled and fixed to the wall
Free survey visit to check water, waste, power and outside wall positions
Extract fan fitted to clear moisture from washing and drying
Washing machine supply, waste and isolation valve, tested for leaks

Utility room fitting prices in New Cross

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Utility room fitting prices in New Cross
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,600–£3,900
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,900–£9,100
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£520–£1,300

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Fitting kitchens in older and newer New Cross homes

Across Greater London you will often find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, and each shapes the kitchen differently. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to utility room fitting in New Cross?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your utility room fitting

Before choosing a dryer for your New Cross utility, check whether there is an outside wall close enough for a short, straight vent duct.
Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
If the utility will be in the garage of your New Cross home, make sure the space stays above freezing in winter for the pipes and machines.
Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in New Cross

How much does utility room fitting cost in New Cross?

Guide prices in New Cross are about £1,600 to £3,900 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of New Cross do you work in?

All of them. Our Greater London coverage takes in the whole of New Cross, including the SE14 postcode district, as well as surrounding towns such as Brockley. If you are unsure, send us your postcode.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Utility room fitting in neighbouring towns

Neighbouring towns where we offer utility room fitting: