Kitchen electrics in Catford

When do kitchen electrics make sense in Catford?

Buyers of older houses across Greater London sometimes find a consumer unit with no RCD protection or spare space, and want it dealt with before a new kitchen goes in.

Kitchens bought online often come with integrated appliances that need their own supplies and switches, so it pays to plan those for your Catford kitchen before the units arrive. Our Greater London coverage reaches every part of Catford (SE6) and out towards Brockley.

What does the job involve?

Here is what usually goes into kitchen electrics, adjusted to your Catford kitchen after we have measured it:

Second fix of sockets, switches and appliance connections once tiling is done
A dedicated circuit for an oven, range cooker or induction hob where needed
Testing, the correct certificate, and notification of the work where it is required
Supplies for the cooker hood, under-cabinet lights and a boiling water tap
Socket positions planned around worktop appliances, the kettle spot and any breakfast bar
A check of the consumer unit, existing circuits and earthing before the layout is fixed

What should you budget for kitchen electrics in Catford?

As a starting point for Catford, these ranges include VAT at 20% and allow for typical labour costs in London. Prices in London usually run above the national guide, mainly because labour and parking cost more.

What should you budget for kitchen electrics in Catford?
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£320–£650
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£650–£2,000
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£390–£910

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Fitting kitchens in older and newer Catford homes

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Catford

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
Expect the power to be off in parts of your Catford home for a few hours on first-fix and second-fix days, and charge laptops and phones beforehand.
Find your consumer unit and take a photo of it before the survey of your Catford home, so the electrician can see straight away whether it has spare ways.
Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.

Questions about kitchen electrics in Catford

How much do kitchen electrics cost in Catford?

Kitchen electrics in Catford typically cost £320 to £650 including VAT for extra sockets or spurs on existing circuits, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Catford before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Catford. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Also covering nearby towns

We also carry out kitchen electrics in these towns near Catford: