Kitchen Installers UK

Utility room fitting · Aberdeen and Aberdeenshire

Utility room fitting in Stonehaven

Utility room fitting for Stonehaven homes: utility rooms fitted with units, a sink, washer and dryer connections and a worktop over the appliances. Every job starts with a free survey visit and a written quote.

Guide price£380 to £6,600
Postcodes includeAB39
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Who usually needs utility room fitting in Stonehaven?

If the kitchen in your Aberdeen and Aberdeenshire home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

Families in Stonehaven often want the washing machine out of the kitchen, so the noise, the wet laundry and the drying racks have a room of their own. Stonehaven sits about 13 miles south of Aberdeen, and our Aberdeen and Aberdeenshire coverage takes in everything in between.

What is included in the work?

After the survey visit we write the scope down. For utility room fitting in Stonehaven it usually covers:

  • Extract fan fitted to clear moisture from washing and drying
  • Washing machine supply, waste and isolation valve, tested for leaks
  • Utility sink and tap plumbed in, with new supplies and waste where none exist
  • Worktop over the washing machine and dryer, supported clear of the appliances
  • Base, wall and tall units fitted, levelled and fixed to the wall
  • A vent to outside for a vented dryer, or a drain hose for condenser models

Guide prices for utility room fitting in Stonehaven

These guide ranges include VAT at 20% and are adjusted for prices in Scotland. We confirm your price in writing after a free survey visit. Labour rates in Scotland are generally lower than in London and the South East, so these ranges are a little below the national guide.

Guide prices for utility room fitting in Stonehaven
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,100–£2,800
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£2,800–£6,600
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£380–£940

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Stonehaven

Typical homes in this part of Aberdeen and Aberdeenshire include granite tenement flats, granite villas, post-war council-built houses and farm cottages. Granite tenement flats often have a small kitchen off the hall, while villas and bungalows across Aberdeenshire tend to have a separate kitchen beside the dining room.

Tenement flats without lifts mean carrying units up common stairs, and rural farm tracks can be narrow for delivery lorries. Mains water across Aberdeen and Aberdeenshire is soft, so limescale is rarely a problem and taps, sinks and boiling water taps stay cleaner.

What rules apply to utility room fitting in Stonehaven?

In Scotland, fitting utility units, plumbing in appliances and adding an extractor fan do not normally need a building warrant, but the electrics must meet the building standards and BS 7671, so ask for an Electrical Installation Certificate. A new connection to an underground drain, for example from a utility in a garage, needs a warrant first. Where an open-flued boiler is in the room, a Gas Safe registered engineer should check its flue with a spillage test after a fan is fitted.

Homes in the Cairngorms National Park, listed granite buildings and conservation areas may need consent for new external vents, and tenement owners may need neighbours' agreement.

Practical advice for Stonehaven homeowners

  • If the utility will be in the garage of your Stonehaven home, make sure the space stays above freezing in winter for the pipes and machines.
  • Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
  • Plan the sockets in your Stonehaven utility so each appliance can be switched off at an accessible switch without moving the machine.
  • Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.

Questions about utility room fitting in Stonehaven

How much does utility room fitting cost in Stonehaven?

Guide prices in Stonehaven are about £1,100 to £2,800 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Stonehaven before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Stonehaven. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Utility room fitting in neighbouring towns

We also carry out utility room fitting in these towns near Stonehaven:

Combine utility room fitting with other work

Free survey visit

Book a free survey visit in Stonehaven

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price