Fit-only kitchen fitting in Frome

Why fit-only kitchen fitting for a Frome home?

If you are renovating a house in Frome yourself, buying the kitchen direct and paying only for fitting keeps the choice of units and the budget in your hands.

Plenty of homeowners in Frome buy a kitchen in a sale or from an online supplier, then look for someone to fit it once the delivery date is booked. Our Somerset coverage reaches every part of Frome (BA11) and out towards Warminster.

What does fit-only kitchen fitting in Frome include?

After the survey visit we write the scope down. For fit-only kitchen fitting in Frome it usually covers:

Doors and drawer fronts hung and adjusted, with handles drilled and fitted
Laminate or wood worktops cut, jointed, sealed and fixed down
Sink, tap and appliances connected to the existing water, waste and power points
Free survey visit to check your plan, the room and the service positions
Packaging and offcuts cleared, with removal of the old kitchen available as an extra
End panels, filler panels, plinths, cornice and light rail scribed and fitted

What does fit-only kitchen fitting cost in Frome?

The figures below are guide prices for Frome, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Prices across the South West are broadly in line with UK averages.

What does fit-only kitchen fitting cost in Frome?
Typical project	Guide price
Small kitchen (5–10 units)Labour to fit units, doors, laminate worktops and panels you have bought	£1,500–£2,600
Medium kitchen (10–15 units)As above	£2,600–£3,600
Large kitchen (15+ units, island or tall larders)As above	£3,600–£4,600
Fitter day rateOne fitter; a two-person team is usually £300–£450 per day	£190–£290 per day

Fit-only prices cover labour for units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved plumbing, gas connections, tiling, flooring and plastering are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Frome?

Typical homes in this part of Somerset include Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Regulations for kitchen work in Frome

Fitting kitchen units you have bought needs no planning permission in England, although a listed building may need listed building consent for work that affects its character. Adding sockets or spurs to an existing kitchen circuit is not notifiable but must meet BS 7671, while a new cooker circuit is notifiable under Part P and certified through a competent person scheme or building control. Gas hobs are connected only by Gas Safe registered engineers.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Getting the most from your fit-only kitchen fitting

If you buy a worktop for a Frome kitchen yourself, check its length covers the longest run plus enough spare for joints and end trims.
Keep using the old kitchen until fitting day if you can, and ask for its removal and disposal to be priced on the same quote.
Photograph each pallet and any damaged box as it arrives at your Frome address, and note the damage on the delivery note before the driver leaves.
Check the order includes filler panels, end panels, plinths, cornice or light rail, and enough legs and plinth clips for every base unit.

Questions about fit-only kitchen fitting in Frome

How much does fit-only kitchen fitting cost in Frome?

Guide prices in Frome are about £1,500 to £2,600 including VAT for a small kitchen of 5 to 10 units. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Frome?

Yes. We work across Frome, including the BA11 postcode district, and nearby towns such as Warminster and Trowbridge. Book a free survey visit and we will arrange a time that suits you.

What does fit-only kitchen fitting not include?

It does not include stone worktops, new electrical circuits, moved plumbing, gas connections, tiling, flooring or plastering. Stone is templated and fitted by the stone supplier or fabricator once the base units are fixed. Fit only covers the labour for units, doors, panels, plinths and laminate worktops, with connections to the points already in place. Any of the extras can be added as separate lines on the same written quote.

Do I need to order anything extra for a fit-only job?

Often, yes. Retail plans regularly leave out filler panels, end panels, plinths, cornice or light rail, legs and plinth clips, worktop joint strips or connector bolts, appliance door-fixing kits and the sink, tap and waste. On the survey we go through your order line by line and list anything missing, so it can be ordered before the fit rather than halting it halfway through.

What happens if parts of my kitchen are missing or damaged?

Missing or damaged parts are the supplier's to replace. We check the delivery against your plan and delivery note before fitting starts and tell you straight away if anything is short, broken or wrong, so you can raise it with the supplier while we re-plan the order of work. Units that do not depend on the missing part can often still go in, and sealed boxes make any claim simpler.

Nearby places we cover

Neighbouring towns where we offer fit-only kitchen fitting: