Kitchen strip-out and removal in Shrewsbury

What prompts kitchen strip-out and removal in Shrewsbury?

If your Shrewsbury home was built before 2000, it may contain asbestos in textured ceilings, old floor tiles or under an old steel sink, so a planned strip-out matters more than speed.

Homeowners in Shrewsbury often book a strip-out on its own when a builder or another fitter is handling the new kitchen but nobody has planned how the old one comes out safely. Homes right across Shrewsbury are covered, as are nearby places such as Wellington, Telford and the villages in between.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old tiles stripped and walls prepared for plaster, where that is agreed
Survey of gas, electrical and water positions and the route out of the house
Gas supply disconnected and capped by a Gas Safe registered engineer
Wall units, base units, worktops, sink and appliances removed in order
Waste taken through licensed routes and old appliances sent for recycling
Water isolated and supplies capped so the rest of the house keeps running water

Kitchen strip-out and removal prices in Shrewsbury

The figures below are guide prices for Shrewsbury, including VAT and adjusted for typical costs across the West Midlands. The fixed price comes after we have measured up. For the West Midlands, these ranges are close to the national figures.

Kitchen strip-out and removal prices in Shrewsbury
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£200–£500
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£300–£700
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£500–£1,200

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

House types around Shrewsbury and what they mean for a kitchen

Typical homes in this part of Shropshire include timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Do you need approval for kitchen strip-out and removal in Shrewsbury?

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Before you book kitchen strip-out and removal in Shrewsbury

Let neighbours in your Shrewsbury terrace or block know when the strip-out is booked; it is a noisy day, and a van or skip may need parking space.
Empty every cupboard, the fridge and the freezer the day before the strip-out, and defrost the freezer so it can be carried out without leaking.
Measure the hallway and doors on the route out; long worktops and tall larder units sometimes need cutting down to leave the house without damaging walls.
Old steel sinks sometimes have bitumen sound-deadening pads underneath, which may contain asbestos and should be tested before the sink is broken up.

Questions about kitchen strip-out and removal in Shrewsbury

How much does kitchen strip-out and removal cost in Shrewsbury?

For removing and disposing of an old kitchen, budget around £200 to £500 including VAT in Shrewsbury. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Do you cover all of Shrewsbury?

Yes. We work across Shrewsbury, including the SY1 postcode district, and nearby towns such as Wellington and Telford. Book a free survey visit and we will arrange a time that suits you.

Can you strip out a kitchen for another fitter or builder?

Yes. We can take out the old kitchen on its own and leave the room ready, with gas capped, circuits made safe and water isolated, so your builder or fitter starts with a clear space. Tell us at the survey what condition the walls and floor should be left in, because stripping back to bare walls is a bigger job than removing units.

Do I need a skip for a kitchen strip-out?

Not always. A small kitchen can often go in a van in one or two trips, while a larger strip-out with tiles and plaster usually needs a skip. A skip on your drive needs no permit, but one on the road usually needs a permit from the council or roads authority, which the skip firm normally arranges. We agree the method at the survey.

Where does the old kitchen go after it is removed?

Into licensed waste routes. Units, worktops and packaging go by skip or van with a registered waste carrier to permitted sites, and old appliances go for recycling, which matters most for fridges and freezers because their gases need specialist treatment. Anything you want to keep or sell, such as a working oven, is set aside before the strip-out starts.

Nearby places we cover

Close to Shrewsbury? We cover these nearby towns too: