Kitchen worktop fitting in Romsey

Who usually needs kitchen worktop fitting in Romsey?

Households in Romsey who cook a lot often want a harder-wearing surface near the hob, such as quartz, sintered stone or compact laminate, that copes with daily use.

If your Hampshire kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time. If your home is in Romsey or close by in Totton or Eastleigh, the same survey, quote and fitting process applies.

What is in a typical job?

After the survey visit we write the scope down. For kitchen worktop fitting in Romsey it usually covers:

Quartz, granite or sintered stone templated once the base units are fixed and level
Free survey visit to measure the runs and check the base units are level
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Matching upstands fitted and the joint to the wall sealed
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Old worktops removed and taken away, with the sink and hob disconnected safely

Guide prices for kitchen worktop fitting in Romsey

Typical kitchen worktop fitting prices for homes in Romsey, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for kitchen worktop fitting in Romsey
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Romsey homes

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Building regulations, electrics and gas in Romsey

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Tips before you start

Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
If your Hampshire home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Check that full-length worktops can get into your Romsey home; long lengths need a clear, straight route through the front door and hall.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Romsey

How much does kitchen worktop fitting cost in Romsey?

Guide prices in Romsey are about £580 to £1,400 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Romsey as well?

Yes. As well as Romsey itself, we cover the rest of Hampshire and nearby towns such as Totton and Eastleigh. The process is the same wherever the kitchen is.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Nearby places we cover

We also carry out kitchen worktop fitting in these towns near Romsey: