Flat-pack kitchen fitting in Romsey

Thinking about flat-pack kitchen fitting in Romsey?

If you are fitting a utility room as well as a kitchen in Romsey, flat-pack units for both rooms can be built and fitted as part of the same job.

If your kitchen is in a Romsey flat or a small terrace with no room for a delivery of built cabinets, flat-pack units can be assembled in the room itself. We cover all of Romsey, including the SO51 postcode district, and travel out to neighbouring towns across Hampshire.

What is in a typical job?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Romsey kitchen after we have measured it:

Wall units hung on hanging rails or brackets fixed securely into the wall
Carcasses assembled on site on a flat surface and checked for square
Panels, plinths, sink, tap and appliance connections to existing points
Back panels fitted fully into their grooves or fixed as the instructions require
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Free survey visit to check the plan, the boxes and the room

Flat-pack kitchen fitting prices in Romsey

As a starting point for Romsey, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Flat-pack kitchen fitting prices in Romsey
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£2,100–£3,400
Medium flat-pack kitchen, built and fittedAs above	£3,200–£4,800
Large flat-pack kitchen with tall units, built and fittedAs above	£4,600–£6,300

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Kitchens in homes around Romsey

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Do you need approval for flat-pack kitchen fitting in Romsey?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Getting the most from your flat-pack kitchen fitting

Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Count the boxes against the delivery note when your flat-pack kitchen arrives in Romsey; orders can run to dozens of boxes and one short box can stall a fit.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Look at the back panels supplied; thin backs rely on being fitted correctly into their grooves to keep each carcass square and rigid.

Questions about flat-pack kitchen fitting in Romsey

How much does flat-pack kitchen fitting cost in Romsey?

Guide prices in Romsey are about £2,100 to £3,400 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Romsey do you work in?

All of them. Our Hampshire coverage takes in the whole of Romsey, including the SO51 postcode district, as well as surrounding towns such as Totton. If you are unsure, send us your postcode.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Nearby places we cover

Close to Romsey? We cover these nearby towns too: