Kitchen worktop fitting in Lancing

What prompts kitchen worktop fitting in Lancing?

Solid wood that has blackened around the sink and tap is a common reason people in Lancing ask about replacing their worktops with something new.

Homeowners in Lancing with sound units but worn, chipped or swollen laminate often replace just the worktops, keeping the rest of the kitchen as it is. We work throughout Lancing (BN15) and across the wider West Sussex area.

What is included in the work?

After the survey visit we write the scope down. For kitchen worktop fitting in Lancing it usually covers:

Solid wood oiled before and after fitting and fixed to allow seasonal movement
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Free survey visit to measure the runs and check the base units are level
Old worktops removed and taken away, with the sink and hob disconnected safely
Matching upstands fitted and the joint to the wall sealed

What should you budget for kitchen worktop fitting in Lancing?

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Lancing kitchen. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What should you budget for kitchen worktop fitting in Lancing?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Lancing?

The housing mix across West Sussex includes 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows, so no two kitchen fits are quite alike. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

Do you need approval for kitchen worktop fitting in Lancing?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Worth knowing before the fit

If your Lancing kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Use trivets for hot pans on every type of worktop; sudden heat can scorch laminate and wood and mark or crack some stone.

Questions about kitchen worktop fitting in Lancing

How much does kitchen worktop fitting cost in Lancing?

Kitchen worktop fitting in Lancing typically costs £580 to £1,400 including VAT for laminate worktops, supplied and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Lancing as well?

Yes. As well as Lancing itself, we cover the rest of West Sussex and nearby towns such as Shoreham-by-Sea and Worthing. The process is the same wherever the kitchen is.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

Kitchen worktop fitting near Lancing

We also carry out kitchen worktop fitting in these towns near Lancing: