Kitchen worktop fitting in Brighton

When does kitchen worktop fitting make sense in Brighton?

Many people in East Sussex choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template.

If your East Sussex kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time. Our East Sussex coverage reaches every part of Brighton (BN2) and out towards Hove.

What does kitchen worktop fitting in Brighton include?

Here is what usually goes into kitchen worktop fitting, adjusted to your Brighton kitchen after we have measured it:

Solid wood oiled before and after fitting and fixed to allow seasonal movement
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Quartz, granite or sintered stone templated once the base units are fixed and level
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Old worktops removed and taken away, with the sink and hob disconnected safely
Free survey visit to measure the runs and check the base units are level

What does kitchen worktop fitting cost in Brighton?

Typical kitchen worktop fitting prices for homes in Brighton, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What does kitchen worktop fitting cost in Brighton?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Brighton homes

In and around Brighton, homes range across Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning. East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering.

Do you need approval for kitchen worktop fitting in Brighton?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Tips before you start

Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
If your Brighton kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.

Questions about kitchen worktop fitting in Brighton

How much does kitchen worktop fitting cost in Brighton?

Kitchen worktop fitting in Brighton typically costs £580 to £1,400 including VAT for laminate worktops, supplied and fitted, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Brighton before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Brighton. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Nearby places we cover

Close to Brighton? We cover these nearby towns too: