Kitchen worktop fitting in Portslade

Why do people in Portslade choose kitchen worktop fitting?

Solid wood that has blackened around the sink and tap is a common reason people in Portslade ask about replacing their worktops with something new.

Many people in East Sussex choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template. Kitchens in every part of Portslade are covered, and the survey visit is free wherever you are in East Sussex.

What is in a typical job?

The exact scope is agreed after the survey, but a typical job in Portslade covers:

Matching upstands fitted and the joint to the wall sealed
Quartz, granite or sintered stone templated once the base units are fixed and level
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Old worktops removed and taken away, with the sink and hob disconnected safely
Free survey visit to measure the runs and check the base units are level
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers

Guide prices for kitchen worktop fitting in Portslade

The figures below are guide prices for Portslade, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Guide prices for kitchen worktop fitting in Portslade
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of East Sussex include Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning. East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering.

What rules apply to kitchen worktop fitting in Portslade?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Practical advice for Portslade homeowners

Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
Before templating day at your Portslade home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Portslade

How much does kitchen worktop fitting cost in Portslade?

For laminate worktops, supplied and fitted, budget around £580 to £1,400 including VAT in Portslade. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near Portslade as well?

Yes. As well as Portslade itself, we cover the rest of East Sussex and nearby towns such as Hove and Shoreham-by-Sea. The process is the same wherever the kitchen is.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Nearby places we cover

The same service is available a short drive from Portslade, including: