Kitchen worktop fitting in Littlehampton

Is kitchen worktop fitting right for your Littlehampton kitchen?

If your West Sussex kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time.

Some homeowners across West Sussex have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead. Kitchens in every part of Littlehampton are covered, and the survey visit is free wherever you are in West Sussex.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Quartz, granite or sintered stone templated once the base units are fixed and level
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Matching upstands fitted and the joint to the wall sealed
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed

Guide prices for kitchen worktop fitting in Littlehampton

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Littlehampton kitchen. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for kitchen worktop fitting in Littlehampton
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Littlehampton?

Across West Sussex you will often find 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows, and each shapes the kitchen differently. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey. West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering.

What rules apply to kitchen worktop fitting in Littlehampton?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Practical advice for Littlehampton homeowners

If your Littlehampton kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Before templating day at your Littlehampton home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Check that full-length worktops can get into your Littlehampton home; long lengths need a clear, straight route through the front door and hall.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Littlehampton

How much does kitchen worktop fitting cost in Littlehampton?

Guide prices in Littlehampton are about £580 to £1,400 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Littlehampton do you work in?

All of them. Our West Sussex coverage takes in the whole of Littlehampton, including the BN17 postcode district, as well as surrounding towns such as Bognor Regis. If you are unsure, send us your postcode.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

Also covering nearby towns

Close to Littlehampton? We cover these nearby towns too: