Kitchen worktop fitting in Hayes, Greater London

Is kitchen worktop fitting right for your Hayes, Greater London kitchen?

If your Greater London kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time.

Some homeowners across Greater London have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead. Our Greater London coverage reaches every part of Hayes, Greater London (UB3 and UB8) and out towards Southall.

What does kitchen worktop fitting in Hayes, Greater London include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old worktops removed and taken away, with the sink and hob disconnected safely
Quartz, granite or sintered stone templated once the base units are fixed and level
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Free survey visit to measure the runs and check the base units are level
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed

Guide prices for kitchen worktop fitting in Hayes, Greater London

The figures below are guide prices for Hayes, Greater London, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for kitchen worktop fitting in Hayes, Greater London
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£650–£1,600
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,200–£2,300
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£2,000–£4,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,300–£4,600
Old worktops removed and taken awayMore for stone	£100–£320

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Local homes and their kitchens

You will find Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis throughout Greater London. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to kitchen worktop fitting in Hayes, Greater London?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

For a Hayes, Greater London kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
If your Greater London home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.

Questions about kitchen worktop fitting in Hayes, Greater London

How much does kitchen worktop fitting cost in Hayes, Greater London?

Kitchen worktop fitting in Hayes, Greater London typically costs £650 to £1,600 including VAT for laminate worktops, supplied and fitted, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Hayes, Greater London as well?

Yes. As well as Hayes, Greater London itself, we cover the rest of Greater London and nearby towns such as Southall and South Ruislip. The process is the same wherever the kitchen is.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Kitchen worktop fitting in neighbouring towns

Close to Hayes, Greater London? We cover these nearby towns too: