Kitchen Installers UK

Kitchen underfloor heating · Greater London

Kitchen underfloor heating in Hayes, Greater London

Kitchen underfloor heating in Hayes, Greater London starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

Guide price£320 to £5,200
Postcodes includeUB3 and UB8
Timescale1 to 2 days, then floor finishes once the screed or levelling has cured
An electric underfloor heating mat rolled out over insulation boards on a kitchen floor, ready to be tiled

Why kitchen underfloor heating for a Hayes, Greater London home?

Households in Hayes, Greater London who spend most of the day in the kitchen often want warmth spread across the floor where people sit, rather than one hot radiator.

Homeowners in Hayes, Greater London with a cold solid floor often add insulation boards and electric heating during a refit, so the tiles feel comfortable underfoot in winter. We cover all of Hayes, Greater London, including the UB3 and UB8 postcode districts, and travel out to neighbouring towns across Greater London.

What does the job involve?

Here is what usually goes into kitchen underfloor heating, adjusted to your Hayes, Greater London kitchen after we have measured it:

  • A survey of the subfloor, open floor area and existing heating system
  • Electric mats or cables, or wet pipework connected through a manifold
  • Insulation boards so the floor responds more quickly when the heating comes on
  • A heating layout drawn to the kitchen plan, clear of units and appliances
  • A new circuit or fused spur, plus a thermostat with a floor sensor
  • Plinth heaters fitted under base units where wall space for a radiator is short

Guide prices for kitchen underfloor heating in Hayes, Greater London

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Hayes, Greater London kitchen. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for kitchen underfloor heating in Hayes, Greater London
Typical projectGuide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat£780–£2,000
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards£2,000–£5,200
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short£320–£780

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Kitchens in homes around Hayes, Greater London

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Regulations for kitchen work in Hayes, Greater London

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Before you book kitchen underfloor heating in Hayes, Greater London

  • Photograph the heating mats or pipes before the floor goes down, so you know where they run if you ever need to drill into it.
  • Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Hayes, Greater London kitchen.
  • Keep rugs light in your Hayes, Greater London kitchen-diner; heavy rugs and thick mats hold heat in the floor instead of letting it warm the room.
  • Allow time for screed or levelling compound to cure before tiles or other finishes go down, as laying too soon risks cracks and lifting.

Questions about kitchen underfloor heating in Hayes, Greater London

How much does kitchen underfloor heating cost in Hayes, Greater London?

Kitchen underfloor heating in Hayes, Greater London typically costs £780 to £2,000 including VAT for electric underfloor heating for a kitchen floor, based on prices in London. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Hayes, Greater London?

Yes. We work across Hayes, Greater London, including the UB3 and UB8 postcode districts, and nearby towns such as Southall and South Ruislip. Book a free survey visit and we will arrange a time that suits you.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Kitchen underfloor heating near Hayes, Greater London

Close to Hayes, Greater London? We cover these nearby towns too:

More services for Hayes, Greater London kitchens

Free survey visit

Book a free survey visit in Hayes, Greater London

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price