Sink and tap installation in Hayes, Greater London

When does sink and tap installation make sense in Hayes, Greater London?

Homeowners across Greater London adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.

If a new dishwasher or washing machine is going next to the sink in your Hayes, Greater London home, the trap and waste connections usually need changing as well. We cover all of Hayes, Greater London, including the UB3 and UB8 postcode districts, and travel out to neighbouring towns across Greater London.

What is in a typical job?

Here is what usually goes into sink and tap installation, adjusted to your Hayes, Greater London kitchen after we have measured it:

Every joint leak tested, with water flow and drainage checked before handover
Inset sink cut-outs made on site in laminate and wood worktops
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
New sink fitted, sealed and connected to the existing supplies and waste
Sink moved to a new position with new supply and waste runs

Guide prices for sink and tap installation in Hayes, Greater London

Use these ranges to plan your budget. They include VAT, reflect costs in London, and are firmed up once we have seen your Hayes, Greater London kitchen. Prices in London usually run above the national guide, mainly because labour and parking cost more.

Guide prices for sink and tap installation in Hayes, Greater London
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£260–£520
Boiling water tap installedTank under the sink, filter and power supply	£200–£460
Sink moved to a new positionNew supplies and waste run	£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

What kind of kitchens do we fit in Hayes, Greater London?

The housing mix across Greater London includes Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day. London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in.

Regulations for kitchen work in Hayes, Greater London

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Tips before you start

Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
Ask whether a boiling water tap for your kitchen in Greater London needs a filter, how often it should be changed and where it will sit in the cupboard.
For a ceramic farmhouse-style sink in your Hayes, Greater London kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Hayes, Greater London

How much does sink and tap installation cost in Hayes, Greater London?

For plumbing in a new sink and tap, budget around £260 to £520 including VAT in Hayes, Greater London. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Do you work near Hayes, Greater London as well?

Yes. As well as Hayes, Greater London itself, we cover the rest of Greater London and nearby towns such as Southall and South Ruislip. The process is the same wherever the kitchen is.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Also covering nearby towns

Close to Hayes, Greater London? We cover these nearby towns too: