Hob and oven installation in Hayes, Greater London

What prompts hob and oven installation in Hayes, Greater London?

Many households in Hayes, Greater London switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

If your Hayes, Greater London kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. If your home is in Hayes, Greater London or close by in Southall or South Ruislip, the same survey, quote and fitting process applies.

What we cover for hob and oven installation in Hayes, Greater London

Your written quote lists everything included. For hob and oven installation, that normally means:

Built-in single and double ovens fixed into housings with their ventilation gaps
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Old hob or oven disconnected safely and taken away for recycling
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Gas supply moved to a new hob position, with pipework tested and made good
Induction and ceramic hobs wired to a suitable cooker circuit and tested

Guide prices for hob and oven installation in Hayes, Greater London

These guide ranges include VAT at 20% and are adjusted for prices in London. We confirm your price in writing after a free survey visit. Expect costs in London to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for hob and oven installation in Hayes, Greater London
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£160–£390
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£160–£320
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£200–£520
New gas pipe run to a new hob positionPipework, testing and making good	£320–£1,000

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Hayes, Greater London?

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Hayes, Greater London

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Worth knowing before the fit

If you are replacing an old cooker with a separate hob and oven in your Hayes, Greater London kitchen, ask for the gas supply position and condition to be checked first.
Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Greater London can be cut correctly by the fabricator.
Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.

Questions about hob and oven installation in Hayes, Greater London

How much does hob and oven installation cost in Hayes, Greater London?

For connecting a gas hob to an existing supply, budget around £160 to £390 including VAT in Hayes, Greater London. That reflects typical costs in London; we confirm the actual figure in writing once we have measured up.

Can you measure up in Hayes, Greater London before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Hayes, Greater London. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Hob and oven installation in neighbouring towns

Close to Hayes, Greater London? We cover these nearby towns too: