Kitchen worktop fitting in Bournemouth

When does kitchen worktop fitting make sense in Bournemouth?

Some homeowners across Dorset have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead.

When a Bournemouth kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units. We work throughout Bournemouth (BH1, BH2, BH7 and BH10) and across the wider Dorset area.

What we cover for kitchen worktop fitting in Bournemouth

Here is what usually goes into kitchen worktop fitting, adjusted to your Bournemouth kitchen after we have measured it:

Free survey visit to measure the runs and check the base units are level
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Old worktops removed and taken away, with the sink and hob disconnected safely
Matching upstands fitted and the joint to the wall sealed
Quartz, granite or sintered stone templated once the base units are fixed and level

What should you budget for kitchen worktop fitting in Bournemouth?

The figures below are guide prices for Bournemouth, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Costs in the South West sit close to the national guide.

What should you budget for kitchen worktop fitting in Bournemouth?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£520–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£930–£1,900
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,300
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,900–£3,600
Old worktops removed and taken awayMore for stone	£80–£260

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Bournemouth?

Typical homes in this part of Dorset include thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help. Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult.

Do you need approval for kitchen worktop fitting in Bournemouth?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Before you book kitchen worktop fitting in Bournemouth

If your Bournemouth kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
Check that full-length worktops can get into your Bournemouth home; long lengths need a clear, straight route through the front door and hall.
Use trivets for hot pans on every type of worktop; sudden heat can scorch laminate and wood and mark or crack some stone.

Questions about kitchen worktop fitting in Bournemouth

How much does kitchen worktop fitting cost in Bournemouth?

Guide prices in Bournemouth are about £520 to £1,200 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Bournemouth do you work in?

All of them. Our Dorset coverage takes in the whole of Bournemouth, including the BH1, BH2, BH7 and BH10 postcode districts, as well as surrounding towns such as Christchurch. If you are unsure, send us your postcode.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

Also covering nearby towns

We also carry out kitchen worktop fitting in these towns near Bournemouth: