Sink and tap installation in Bournemouth

Why sink and tap installation for a Bournemouth home?

A Bournemouth kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run.

If a new dishwasher or washing machine is going next to the sink in your Bournemouth home, the trap and waste connections usually need changing as well. We work throughout Bournemouth (BH1, BH2, BH7 and BH10) and across the wider Dorset area.

What does sink and tap installation in Bournemouth include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

New sink fitted, sealed and connected to the existing supplies and waste
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Every joint leak tested, with water flow and drainage checked before handover
Sink moved to a new position with new supply and waste runs
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Boiling water tap fitted with its tank, filter and power supply in the cupboard

Sink and tap installation prices in Bournemouth

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Prices across the South West are broadly in line with UK averages.

Sink and tap installation prices in Bournemouth
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£210–£410
Boiling water tap installedTank under the sink, filter and power supply	£150–£360
Sink moved to a new positionNew supplies and waste run	£410–£1,000
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Kitchens in homes around Bournemouth

In and around Bournemouth, homes range across thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult. Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help.

Regulations for kitchen work in Bournemouth

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Before you book sink and tap installation in Bournemouth

Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Choose the sink before stone worktops are templated in your Bournemouth kitchen, so the fabricator can cut and polish the undermount opening to suit it.
Find the stopcock in your Bournemouth home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.

Questions about sink and tap installation in Bournemouth

How much does sink and tap installation cost in Bournemouth?

For plumbing in a new sink and tap, budget around £210 to £410 including VAT in Bournemouth. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you cover all of Bournemouth?

Yes. We work across Bournemouth, including the BH1, BH2, BH7 and BH10 postcode districts, and nearby towns such as Christchurch and Poole. Book a free survey visit and we will arrange a time that suits you.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Nearby places we cover

We also carry out sink and tap installation in these towns near Bournemouth: