Kitchen worktop fitting in Poole

When does kitchen worktop fitting make sense in Poole?

If your Dorset kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time.

If you have bought a kitchen online for your Poole home, you may need a fitter to cut and joint the laminate or wood worktops properly on site. We cover all of Poole, including the BH15 postcode district, and travel out to neighbouring towns across Dorset.

What we cover for kitchen worktop fitting in Poole

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Matching upstands fitted and the joint to the wall sealed
Solid wood oiled before and after fitting and fixed to allow seasonal movement
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Free survey visit to measure the runs and check the base units are level
Old worktops removed and taken away, with the sink and hob disconnected safely
Undermount sink and hob cut-outs cut and finished by the stone fabricator

Guide prices for kitchen worktop fitting in Poole

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Costs in the South West sit close to the national guide.

Guide prices for kitchen worktop fitting in Poole
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£520–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£930–£1,900
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,300
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,900–£3,600
Old worktops removed and taken awayMore for stone	£80–£260

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Dorset includes thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows, so no two kitchen fits are quite alike. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult. Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help.

What rules apply to kitchen worktop fitting in Poole?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Practical advice for Poole homeowners

If your Poole kitchen has a gas hob, a Gas Safe registered engineer needs to disconnect it before the old worktops come off.
If your Dorset home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Before templating day at your Poole home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.

Questions about kitchen worktop fitting in Poole

How much does kitchen worktop fitting cost in Poole?

Guide prices in Poole are about £520 to £1,200 including VAT for laminate worktops, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Poole do you work in?

All of them. Our Dorset coverage takes in the whole of Poole, including the BH15 postcode district, as well as surrounding towns such as Bournemouth. If you are unsure, send us your postcode.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Kitchen worktop fitting near Poole

The same service is available a short drive from Poole, including: