Kitchen worktop fitting in Andover

Why do people in Andover choose kitchen worktop fitting?

Many people in Hampshire choose quartz or granite when they upgrade, and need the base units fixed and level before the fabricator can come to template.

If you have bought a kitchen online for your Andover home, you may need a fitter to cut and joint the laminate or wood worktops properly on site. Andover sits about 22 miles north of Southampton, and our Hampshire coverage takes in everything in between.

What is in a typical job?

After the survey visit we write the scope down. For kitchen worktop fitting in Andover it usually covers:

Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Free survey visit to measure the runs and check the base units are level
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Quartz, granite or sintered stone templated once the base units are fixed and level
Old worktops removed and taken away, with the sink and hob disconnected safely

What does kitchen worktop fitting cost in Andover?

Typical kitchen worktop fitting prices for homes in Andover, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What does kitchen worktop fitting cost in Andover?
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£580–£1,400
Solid wood worktops, supplied and fittedOiled before and after fitting	£1,000–£2,100
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,700–£3,700
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£2,100–£4,000
Old worktops removed and taken awayMore for stone	£90–£290

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

What kind of kitchens do we fit in Andover?

In and around Andover, homes range across Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Building regulations, electrics and gas in Andover

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Practical advice for Andover homeowners

Before templating day at your Andover home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
Clear the worktops and the cupboards beneath them before fitting day, as the old tops and the sink need space to come out.
Quartz and granite are heavy; the units must be sound, level and well fixed, and any swollen or weak carcasses replaced first.

Questions about kitchen worktop fitting in Andover

How much does kitchen worktop fitting cost in Andover?

For laminate worktops, supplied and fitted, budget around £580 to £1,400 including VAT in Andover. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near Andover as well?

Yes. As well as Andover itself, we cover the rest of Hampshire and nearby towns such as Winchester and Newbury. The process is the same wherever the kitchen is.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

How are laminate worktops joined at corners?

With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.

Kitchen worktop fitting near Andover

Neighbouring towns where we offer kitchen worktop fitting: