Kitchen electrics in Andover

Why kitchen electrics for an Andover home?

Landlords in Andover often update kitchen electrics between tenancies, so appliances have proper isolation and the kitchen is in good order before the next electrical inspection.

Some Andover homeowners like their kitchen but run extension leads along the worktop; extra sockets on the existing circuit can solve that without a full refit. Our Hampshire coverage reaches every part of Andover (SP10) and out towards Winchester.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Andover covers:

Second fix of sockets, switches and appliance connections once tiling is done
Testing, the correct certificate, and notification of the work where it is required
Supplies for the cooker hood, under-cabinet lights and a boiling water tap
First-fix cables and back boxes run before plastering or boarding
A dedicated circuit for an oven, range cooker or induction hob where needed
Accessible isolation switches for integrated appliances, reachable without pulling units out

Guide prices for kitchen electrics in Andover

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Andover kitchen. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Guide prices for kitchen electrics in Andover
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£290–£580
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£580–£1,700
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£340–£800

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

House types around Andover and what they mean for a kitchen

Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Building regulations, electrics and gas in Andover

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Worth knowing before the fit

Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
Ask for USB sockets or extra doubles near the breakfast bar at first fix; changing a faceplate later is easy, adding a new box is not.
Walk round your Andover kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
Check whether your consumer unit has spare ways and RCD protection; an older board may need upgrading before new circuits can be added.

Questions about kitchen electrics in Andover

How much do kitchen electrics cost in Andover?

Guide prices in Andover are about £290 to £580 including VAT for extra sockets or spurs on existing circuits. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Andover?

Yes. We work across Andover, including the SP10 postcode district, and nearby towns such as Winchester and Newbury. Book a free survey visit and we will arrange a time that suits you.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Kitchen electrics near Andover

Close to Andover? We cover these nearby towns too: