Kitchen underfloor heating in Southsea

Why do people in Southsea choose kitchen underfloor heating?

Many Southsea kitchens lose their only radiator wall to a new run of units, and underfloor heating keeps the room warm without giving up storage.

If your Southsea kitchen opens onto a dining area through a wide opening, one heated floor can run across both, with the units left unheated. Southsea sits about 16 miles south-east of Southampton, and our Hampshire coverage takes in everything in between.

What we cover for kitchen underfloor heating in Southsea

Your written quote lists everything included. For kitchen underfloor heating, that normally means:

Door thresholds and plinth heights checked against the new floor build-up
Insulation boards so the floor responds more quickly when the heating comes on
Plinth heaters fitted under base units where wall space for a radiator is short
A heating layout drawn to the kitchen plan, clear of units and appliances
A new circuit or fused spur, plus a thermostat with a floor sensor
Screed, overlay boards or levelling compound, left to cure before finishes

Guide prices for kitchen underfloor heating in Southsea

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Guide prices for kitchen underfloor heating in Southsea
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£690–£1,700
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,700–£4,600
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£290–£690

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Southsea?

Across Hampshire you will often find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, and each shapes the kitchen differently. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

Regulations for kitchen work in Southsea

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Worth knowing before the fit

Ask for the finished floor height to be worked out before you order units for your Southsea kitchen, so plinths and appliances still fit.
Keep rugs light in your Southsea kitchen-diner; heavy rugs and thick mats hold heat in the floor instead of letting it warm the room.
Allow extra days in your Southsea kitchen plan for screed or levelling to cure before the tiler arrives, rather than squeezing it into the fit.
If the floor is small and there is no wall space for a radiator, a plinth heater under a base unit may be simpler.

Questions about kitchen underfloor heating in Southsea

How much does kitchen underfloor heating cost in Southsea?

Kitchen underfloor heating in Southsea typically costs £690 to £1,700 including VAT for electric underfloor heating for a kitchen floor, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Southsea?

Yes. We work across Southsea, including the PO4 postcode district, and nearby towns such as Portsmouth and Gosport. Book a free survey visit and we will arrange a time that suits you.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

How soon can a floor be tiled over underfloor heating?

It depends on what the heating is laid in. Thin levelling compounds over electric mats are generally ready far sooner than a traditional sand and cement screed over wet pipes, which needs much longer to dry. The product instructions set the curing time, and the heating should be brought up to temperature gradually, following the system's commissioning guidance, rather than used to dry the floor.

Nearby places we cover

The same service is available a short drive from Southsea, including: