Kitchen underfloor heating in Gosport

Is kitchen underfloor heating right for your Gosport kitchen?

In a compact Gosport kitchen with no room for a radiator at all, a plinth heater tucked under a base unit can be the simplest answer.

People planning a heat pump in Hampshire sometimes add underfloor heating to the kitchen at the same time, while the old floor is already up and the room is empty. We cover all of Gosport, including the PO12 postcode district, and travel out to neighbouring towns across Hampshire.

What does the job involve?

Your written quote lists everything included. For kitchen underfloor heating, that normally means:

Screed, overlay boards or levelling compound, left to cure before finishes
Insulation boards so the floor responds more quickly when the heating comes on
A new circuit or fused spur, plus a thermostat with a floor sensor
Door thresholds and plinth heights checked against the new floor build-up
Plinth heaters fitted under base units where wall space for a radiator is short
Electric mats or cables, or wet pipework connected through a manifold

Kitchen underfloor heating prices in Gosport

As a starting point for Gosport, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Kitchen underfloor heating prices in Gosport
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£690–£1,700
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,700–£4,600
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£290–£690

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Gosport?

You will find Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages throughout Hampshire. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle. Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help.

What rules apply to kitchen underfloor heating in Gosport?

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Getting the most from your kitchen underfloor heating

Allow extra days in your Gosport kitchen plan for screed or levelling to cure before the tiler arrives, rather than squeezing it into the fit.
Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Gosport kitchen.
If your Gosport home has a suspended timber floor, ask how the heating will be supported and insulated between the joists.
Insulation boards under an electric system help the floor warm up more quickly, especially when it is laid over a cold concrete slab.

Questions about kitchen underfloor heating in Gosport

How much does kitchen underfloor heating cost in Gosport?

Kitchen underfloor heating in Gosport typically costs £690 to £1,700 including VAT for electric underfloor heating for a kitchen floor, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Gosport?

Yes. We work across Gosport, including the PO12 postcode district, and nearby towns such as Portsmouth and Southsea. Book a free survey visit and we will arrange a time that suits you.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

Nearby places we cover

We also carry out kitchen underfloor heating in these towns near Gosport: