Kitchen underfloor heating in Fareham

Is kitchen underfloor heating right for your Fareham kitchen?

Homeowners in Fareham with a cold solid floor often add insulation boards and electric heating during a refit, so the tiles feel comfortable underfoot in winter.

If your Fareham kitchen opens onto a dining area through a wide opening, one heated floor can run across both, with the units left unheated. Our Hampshire coverage reaches every part of Fareham (PO16) and out towards Gosport.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Fareham covers:

A heating layout drawn to the kitchen plan, clear of units and appliances
Screed, overlay boards or levelling compound, left to cure before finishes
Door thresholds and plinth heights checked against the new floor build-up
Plinth heaters fitted under base units where wall space for a radiator is short
Electric mats or cables, or wet pipework connected through a manifold
Insulation boards so the floor responds more quickly when the heating comes on

Guide prices for kitchen underfloor heating in Fareham

As a starting point for Fareham, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for kitchen underfloor heating in Fareham
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£690–£1,700
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,700–£4,600
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£290–£690

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Fareham?

The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Fareham

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Planning ahead

If you have a heat pump or a newer boiler in Hampshire, ask whether it can supply a wet floor zone or whether electric is simpler.
Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Fareham kitchen.
Allow extra days in your Fareham kitchen plan for screed or levelling to cure before the tiler arrives, rather than squeezing it into the fit.
Heat is laid only across the open floor, not under fitted units or appliances, so the heated area is smaller than the room.

Questions about kitchen underfloor heating in Fareham

How much does kitchen underfloor heating cost in Fareham?

Kitchen underfloor heating in Fareham typically costs £690 to £1,700 including VAT for electric underfloor heating for a kitchen floor, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Fareham do you work in?

All of them. Our Hampshire coverage takes in the whole of Fareham, including the PO16 postcode district, as well as surrounding towns such as Gosport. If you are unsure, send us your postcode.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

How soon can a floor be tiled over underfloor heating?

It depends on what the heating is laid in. Thin levelling compounds over electric mats are generally ready far sooner than a traditional sand and cement screed over wet pipes, which needs much longer to dry. The product instructions set the curing time, and the heating should be brought up to temperature gradually, following the system's commissioning guidance, rather than used to dry the floor.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Nearby places we cover

Neighbouring towns where we offer kitchen underfloor heating: