Hob and oven installation · Hampshire
Hob and oven installation in Southsea
If you live in Southsea and need hob and oven installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.
Thinking about hob and oven installation in Southsea?
Landlords in Hampshire replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.
A new kitchen layout in Southsea sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. Our Hampshire coverage reaches every part of Southsea (PO4) and out towards Portsmouth.
What we cover for hob and oven installation in Southsea
Here is what usually goes into hob and oven installation, adjusted to your Southsea kitchen after we have measured it:
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Old hob or oven disconnected safely and taken away for recycling
- Gas supply moved to a new hob position, with pipework tested and made good
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
How much does hob and oven installation cost in Southsea?
As a starting point for Southsea, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £140–£340 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £140–£290 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £170–£460 |
| New gas pipe run to a new hob positionPipework, testing and making good | £290–£920 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
House types around Southsea and what they mean for a kitchen
Typical homes in this part of Hampshire include Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.
Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.
What rules apply to hob and oven installation in Southsea?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.
Getting the most from your hob and oven installation
- Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Hampshire.
- If you are moving the hob in your Southsea kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- Before buying an induction hob for your Southsea home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
Questions about hob and oven installation in Southsea
How much does hob and oven installation cost in Southsea?
Guide prices in Southsea are about £140 to £340 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover all of Southsea?
Yes. We work across Southsea, including the PO4 postcode district, and nearby towns such as Portsmouth and Gosport. Book a free survey visit and we will arrange a time that suits you.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Hob and oven installation near Southsea
Close to Southsea? We cover these nearby towns too:
- Hob and oven installation in Portsmouth
- Hob and oven installation in Gosport
- Hob and oven installation in Fareham
- Hob and oven installation in Havant
- Hob and oven installation in Waterlooville
- Hob and oven installation in Emsworth
- Hob and oven installation across Hampshire