Kitchen strip-out and removal · England
Kitchen strip-out and removal in Shropshire
We carry out kitchen strip-out and removal across Shropshire, from Telford to the smaller towns, with a free survey visit and an itemised written quote as standard.
Why do people in Shropshire choose kitchen strip-out and removal?
In a flat in Shropshire, removing a kitchen means planning the route out through shared stairs or lifts, protecting common areas and keeping to the building's working hours.
When a builder is about to extend or open up a Shropshire kitchen, the old units, worktops and appliances usually need to come out first so work can start on a clear room.
What does kitchen strip-out and removal in Shropshire include?
Your written quote lists everything included. For kitchen strip-out and removal, that normally means:
- Survey of gas, electrical and water positions and the route out of the house
- Floors, doorways, stairs and the route to the skip or van protected
- Gas supply disconnected and capped by a Gas Safe registered engineer
- Kitchen circuits isolated and made safe by an electrician
- Water isolated and supplies capped so the rest of the house keeps running water
- Wall units, base units, worktops, sink and appliances removed in order
- Old tiles stripped and walls prepared for plaster, where that is agreed
- Waste taken through licensed routes and old appliances sent for recycling
How much does kitchen strip-out and removal cost in Shropshire?
The figures below are guide prices for Shropshire, including VAT and adjusted for typical costs across the West Midlands. The fixed price comes after we have measured up. Prices across the West Midlands are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire | £200–£500 |
| Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician | £300–£700 |
| Strip-out back to bare wallsOld tiles removed and walls prepared for plaster | £500–£1,200 |
Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.
Kitchens in homes across Shropshire
You will find timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses throughout Shropshire. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.
Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.
Telford's new-town houses often have small original kitchens, so owners may remove a partition to open them into the dining area. Rural farmhouses and cottages are frequently off the gas grid, so cooking may run on LPG, an oil-fired range or all-electric induction.
Rules for kitchen strip-out and removal in Shropshire
Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.
Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.
Before you start
- Old steel sinks sometimes have bitumen sound-deadening pads underneath, which may contain asbestos and should be tested before the sink is broken up.
- Decide what is being kept, such as a working oven or units for a garage, and label it clearly before the strip-out day.
- Line up the new kitchen soon after the strip-out, as the room stays without a cooker or sink until the services are reconnected.
- Leaseholders should check the lease and building rules on working hours, lift use and waste storage before booking a strip-out.
- Set up a kettle and microwave in another room of your home in Shropshire, as the kitchen will have no power once the circuits are made safe.
- If a skip will need to sit on the road outside your Shropshire home, speak to the skip firm early, as a permit usually has to be arranged first.
Questions about kitchen strip-out and removal in Shropshire
How much does kitchen strip-out and removal cost in Shropshire?
Kitchen strip-out and removal in Shropshire typically costs £200 to £500 including VAT for removing and disposing of an old kitchen, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Shropshire?
Yes. We carry out kitchen strip-out and removal across Shropshire, including Telford, Shrewsbury, Wellington and Oswestry. Every job starts with a free survey visit and an itemised written quote.
Can you strip out a kitchen for another fitter or builder?
Yes. We can take out the old kitchen on its own and leave the room ready, with gas capped, circuits made safe and water isolated, so your builder or fitter starts with a clear space. Tell us at the survey what condition the walls and floor should be left in, because stripping back to bare walls is a bigger job than removing units.
Where does the old kitchen go after it is removed?
Into licensed waste routes. Units, worktops and packaging go by skip or van with a registered waste carrier to permitted sites, and old appliances go for recycling, which matters most for fridges and freezers because their gases need specialist treatment. Anything you want to keep or sell, such as a working oven, is set aside before the strip-out starts.
Who disconnects the gas and electrics before a strip-out?
A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.
Kitchen strip-out and removal in towns across Shropshire
Choose a town for local guide prices and postcode coverage:
- Kitchen strip-out and removal in Telford
- Kitchen strip-out and removal in Shrewsbury
- Kitchen strip-out and removal in Wellington
- Kitchen strip-out and removal in Oswestry
- Kitchen strip-out and removal in Bridgnorth
- Kitchen strip-out and removal in Market Drayton
- Kitchen strip-out and removal in Ludlow
- Kitchen strip-out and removal in Whitchurch, Shropshire